Categories
Patek Philippe Replica Watches

Patek Philippe Grand Complications ref. 5204P replica mens watches

Waiting is a torment, especially when waiting with the exact object. However, please do not hurry, because waiting has come to an end! Patek Philippe Grand Complications ref. 5204P replica launched with the new manual winding movement developed and horizontal clutch, with a perpetual calendar split seconds chronograph ref. 5204P, the chronograph Series Adds new members.

940
First, let’s look at the power source Replica Patek Philippe replica 5204P‘s simple. CHR 29-535Q movement after launch, CHR 27-70 on the declaration retired. 27-70,29-535 movement than the original diameter to 2 mm long, 32 mm, and the thickness was more slim. Gyromax® balance wheel oscillation frequency of 4 Hz, 2.5 Hz before. In addition, minute chronograph display panel now have instantaneous jump function.
Split-seconds chronograph has two second hand, their use varies. Under normal operating state, these two pointers to keep in sync.

941

When the function is enabled after needle, patek philippe grand complications replica  pointer will stop immediately, so that the recording interval. After the release, chronographs pointer will resynchronize with chronograph. Engaged between these two pointers a game machine, which we call “catch the game.” Be the game needs a heart-shaped cam follower fork and rotate along the edge of the ruby ​​heart-shaped cam rollers.

942

Patek Philippe replica watches aid of two innovative technologies in the new CHR 29-535Q movement in the integration of these important functions.
‘Interesting things to come. Before the octopus-shaped gear gone. What is the octopus-shaped gear? Why it will be replaced by it?

943

Octopus-shaped gear is part of the separation device, the role of the two chronograph completely separated, so that the cam follower to reduce drag and friction along the heart-shaped cam rotation process. When you start chasing pin functions, not equipped with separation means chronograph split seconds often encounter such problems. Replace the “octopus-shaped gear” very simple, but the octopus-shaped gear itself is very complicated, watchmakers tuning work is also quite difficult.

944
Next comes gooseneck separation system. Before the separation system has eight round arm, and each one must be individually adjusted, and gooseneck separation system has only one wheel arm and spring. The separation system is actually a horizontal clutch means. Separation gear “A” and chronographs pointer synchronous rotation. After activation chronographs pointer, everything started an orderly manner. First of all, chronographs pointer at the two gripping arms “B” action will immediately stop the operation, at the same time, separate forks “C” and the split gear “A” engagement, and it pushed forward about 30 degrees, Loosen needle protruding through a cam follower arm round “D”. Thus, the timing is still rotating pointer and chronographs pointer separation work is complete. The crucial point is that the two functions to be started simultaneously, otherwise the function will be lost chronographs accurate.

945
After chronographs function, chronographs pointer must again remain fully consistent with the chronograph hand. First, the separation system to stop functioning. Separation gear “A” release cam follower wheel arm “B”, and two gripping arms “D” will be released chronographs pointer. Secondly, with the cam wheel arm chronographs pointer must return to the neutral position, such as “E” shown in place.

946
Chronographs pointer will return to perfect unity and chronograph (recalibrated) has been a thorny issue. Heart-shaped cam, cam follower roller relative proportions and should be as small as possible rubies, especially when included in the replica watch inside. Therefore, chronographs pointer has been a bit narrower than the chronograph hand to conceal the presence of bias adjustment.

947
In order to eliminate any possible bias adjustment, Patek Liche bottom redesigned two seconds after needle heart-shaped cam and cam follower. Heart-shaped cam wheel arm is wider than the previous, while the cam follower base before a completely different shape to place the wheel arm. Of course, the new design is still used to track ruby ​​heart-shaped cam roller to the center, but with the previous calibration by the rollers are completely responsible for different chronographs pointer, relying solely on the side of the rollers on both sides of the heart-shaped cam wheel arm. This ensures that every time to achieve perfect adjustment.

948
All along, the two Hammers made by a single piece of stainless steel. This construction method is always a problem. If the weight of the heavier one hammer, then another hammer will be too light, this will cause can not be adjusted to zero mark. Patek Philippe replica watches‘s solution is to build a hammer connected, so that they remain synchronized throughout. It’s like the human legs, their hips combination has been synchronized to operate until the encounter uneven surfaces, such as stairs. In that case, they will separate motion, and adjust their actions accordingly.

949
To produce loyal to the brand heritage, and unique innovative new complicated replica watches is never easy. After years of research and development, Patek Philippe 5204P replica watches launched a model for this, its appearance restrained low-key, innovative mechanical movement hidden in the case of platinum.